技能执行 Dlazy Execute

SKILL.md

---
name: dlazy-execute
version: 1.1.2
description: Executes a plan's flat shape list end-to-end. Each shape is dispatched through /api/ai/tool in dependency order (resolved from `shape://name:<X>` refs); upstream outputs are substituted into downstream input, and `promptRefs` text is prepended to the consumer's `prompt`. IMPORTANT: only shapes whose `props.status` is `idle` actually run — any other status (`completed` / `failed` / `processing`) is treated as already-done and its existing `props.url` is reused as the producer output. To resume after a failure, set the failed shapes (and any you want re-run) back to `idle`, optionally edit their `props.input`, then call execute again. 执行 plan 输出的扁平节点列表。按 `shape://name:<X>` 引用计算依赖顺序，依次通过 /api/ai/tool 调度每个 shape；上游产物的 url 会替换到下游 input 中相应字段，`promptRefs` 引用的文本会被拼接到消费者的 `prompt` 前面。重要：只有 `props.status === "idle"` 的 shape 才会真正执行；其它状态（`completed` / `failed` / `processing`）一律视为已完成，其当前的 `props.url` 被作为产物供下游引用。若上次执行中途失败，可将失败节点（以及任何需要重跑的节点）的 status 改回 `idle`，可选地修改 `props.input`，再次调用 execute 即可从失败位置继续。
metadata: {"clawdbot":{"emoji":"🤖","requires":{"bins":["npm","npx"]},"install":"npm install -g @dlazy/cli@1.2.0","installAlternative":"npx @dlazy/cli@1.2.0","homepage":"https://github.com/dlazyai/cli","source":"https://github.com/dlazyai/cli","author":"dlazyai","license":"see-repo","npm":"https://www.npmjs.com/package/@dlazy/cli","configLocation":"~/.dlazy/config.json","apiEndpoints":["api.dlazy.com","files.dlazy.com"]},"openclaw":{"systemPrompt":"When invoking this skill, use dlazy execute -h for help."}}
---

# dlazy-execute

[English](./SKILL.md) · [中文](./SKILL-cn.md)

Executes a plan's flat shape list end-to-end. Each shape is dispatched through /api/ai/tool in dependency order (resolved from `shape://name:<X>` refs); upstream outputs are substituted into downstream input, and `promptRefs` text is prepended to the consumer's `prompt`. IMPORTANT: only shapes whose `props.status` is `idle` actually run — any other status (`completed` / `failed` / `processing`) is treated as already-done and its existing `props.url` is reused as the producer output. To resume after a failure, set the failed shapes (and any you want re-run) back to `idle`, optionally edit their `props.input`, then call execute again.

## Trigger Keywords

- execute

## Authentication

All requests require a dLazy API key. The recommended way to authenticate is:

```bash
dlazy login
```

This runs a device-code flow (also works in remote shells) and **automatically saves your API key** to the local CLI config — no manual copy/paste required.

### Alternative: Set the Key Manually

If you already have an API key, you can save it directly:

```bash
dlazy auth set YOUR_API_KEY
```

The CLI saves the key in your user config directory (`~/.dlazy/config.json` on macOS/Linux, `%USERPROFILE%\.dlazy\config.json` on Windows), with file permissions restricted to your OS user account. You can also supply the key per-invocation via the `DLAZY_API_KEY` environment variable.

### Getting Your API Key Manually

1. Sign in or create an account at [dlazy.com](https://dlazy.com)
2. Go to [dlazy.com/dashboard/organization/api-key](https://dlazy.com/dashboard/organization/api-key)
3. Copy the key shown in the API Key section

Each key is scoped to your dLazy organization and can be **rotated or revoked at any time** from the same dashboard.

## About & Provenance

- **CLI source code**: [github.com/dlazyai/cli](https://github.com/dlazyai/cli)
- **Maintainer**: dlazyai
- **npm package**: `@dlazy/cli` (pinned to `1.0.9` in this skill's install spec)
- **Homepage**: [dlazy.com](https://dlazy.com)

You can install on demand without persisting a global binary by running:

```bash
npx @dlazy/cli@1.2.0 <command>
```

Or, if you prefer a global install, the skill's `metadata.clawdbot.install` field declares the exact pinned version (`npm install -g @dlazy/cli@1.2.0`). Review the GitHub source before installing.

## How It Works

This skill is a thin client over the dLazy hosted API. When you invoke it:

- Prompts and parameters you provide are sent to the dLazy API endpoint (`api.dlazy.com`) for inference.
- Any local file paths you pass to image / video / audio fields are uploaded to dLazy's media storage (`files.dlazy.com`) so the model can read them — the same flow as any cloud-based generation API.
- Generated output URLs returned by the API are hosted on `files.dlazy.com`.

This is the standard SaaS pattern; the skill itself does not access network or filesystem resources beyond what the dLazy CLI already handles. See [dlazy.com](https://dlazy.com) for the full service terms.

## Usage

**CRITICAL INSTRUCTION FOR AGENT**:
Execute `dlazy execute` to get the result.

```bash
dlazy execute -h

Options:
  --shapes [shapes...]                 Flat shape list to execute (typically plan.shapes). Cross-shape references inside `props.input` use either `shape://name:<name>` (resolves to the producer matching `props.name`) or `shape://shape:<id>` (resolves to the producer matching `id`); refs whose target is not in this array are dropped as if the param were absent. Each shape's `props.status` controls scheduling: only `idle` shapes run; shapes with any other status are treated as already-done and their `props.url` is reused as the producer output for downstream refs. To resume a failed run, set the failed/affected shapes back to `idle` (optionally edit their `props.input`) and call execute again.
  --projectId [projectId]              Optional project id forwarded to every downstream tool call (used for asset scoping and credit accounting).
  --sessionId [sessionId]              Optional execution session id; pass the same value across resume attempts so logs can be correlated.
  --dry-run                            Print payload + cost estimate without calling API
  --no-wait                            Return generateId immediately for async tasks
  --timeout <seconds>                  Max seconds to wait for async completion (default: "1800")
  -h, --help                           display help for command
```

> Any flag also accepts pipe references — `-` (auto-pick from upstream stdin), `@N` (n-th output), `@N.path` (jsonpath into output), `@*` (all primary values), `@stdin` / `@stdin:path` (whole envelope). See `dlazy --help` for details.

## Output Format

```json
{
  "ok": true,
  "result": {
    "tool": "execute",
    "modelId": "execute",
    "outputs": [
      {
        "type": "shape",
        "id": "o_xxxxxxxx",
        "shape": {}
      }
    ]
  }
}
```

> Async tasks (when `--no-wait` is passed) return `outputs: []` and a `task: { generateId, status }` field instead. Use `dlazy status <generateId> --wait` to poll.

## Examples

```bash
dlazy execute --prompt 'prompt content'
```

## Error Handling

| Code | Error Type                         | Example Message                                                                                                          |
| ---- | ---------------------------------- | ------------------------------------------------------------------------------------------------------------------------ |
| 401  | Unauthorized (No API Key)          | `ok: false, code: "unauthorized", message: "API key is missing or invalid"`                                              |
| 501  | Missing required parameter         | `error: required option '--prompt <prompt>' not specified`                                                               |
| 502  | Local file read error              | `Error: Image file/Video file not found: C:\path\to\your\file`                                                           |
| 503  | API request failed (no balance)    | `ok: false, code: "insufficient_balance"`                                                                                |
| 503  | API request failed (server error)  | `HTTP status code error (500 server crash)`                                                                              |
| 504  | Asynchronous task execution failed | `=== Generation Failed ===` / `{Specific error reason returned by backend, for example "Prompt violates safety policy"}` |

> **AGENT CRITICAL INSTRUCTION**:
>
> 1. If the execution result returns `code: "insufficient_balance"`, you MUST explicitly inform the user that their credits are insufficient and guide them to recharge: [https://dlazy.com/dashboard/organization/settings?tab=credits](https://dlazy.com/dashboard/organization/settings?tab=credits)
> 2. If the execution result returns `code: "unauthorized"` or indicates missing API key, you MUST inform the user to get their API key from [https://dlazy.com/dashboard/organization/api-key](https://dlazy.com/dashboard/organization/api-key) and save it using `dlazy auth set <key>` and resume the task.

## Tips

Visit https://dlazy.com for more information.